Determination of the residual resource of carrying metal frames of cars of hopper dosers and dumpkars (dumpers) based on the results of technical diagnostics and typical tests

Authors

  • O. Koshel
  • S. Sapronova
  • D. Bulich
  • V. Tkachenko

DOI:

https://doi.org/10.32703/2617-9040-2020-35-2

Keywords:

residual life, hopper dosers, dumpkars (dumpers), technical diagnostics, type tests, operational characteristics, carrying metal structure

Abstract

Most of the cars of hopper dosers and dumpkars (dumpers)  on the railways of ukraine have a service life that significantly exceeds that established by the manufacturer. The article studies the residual life of load-bearing metal structures of hopper dosers and dumpkars (dumpers)  based on the results of technical diagnostics and type tests. The analysis of the ratio of the actual thickness of the spinal beam of cars to the nominal values. Possible places of occurrence of typical defects in hopper dosers and dumpkars (dumpers) are determined. it is concluded that the state of the supporting metal structures of cars after long-term operation does not approach the limit. the obtained practical and theoretical results allow us to develop a set of measures to assess the residual life of the bearing metal structures of hopper dosers and dumpkars (dumpers).

References

Фомін, О.В, Прокопенко, П.М., Горбунов, М.І., Сапронова, С.Ю. Поліпшення несучої здатності вагона-хопера для перевезення зерна з метою підвищення опору динамічним зусиллям. Вісник СНУ ім. В.Даля. Сєверодонецьк: Вид-во СНУ ім. В.Даля, 2017. №5[235]. С. 88-99.

Сапронова, С.Ю., Кошель, О.О., Ткаченко, В.П., Буліч, Д.І., Радкевич, М.М. Аналіз методів подовження терміну служби вантажних вагонів. Транспортні системи і технології. Київ: Вид-во ДУІТ, 2019, Том 1, №33. С. 118-129.

Сапронова, С.Ю., Буліч, Д.І., Ткаченко, В.П. Продовження терміну експлуатації вантажних вагонів. Вісник СНУ ім. В.Даля. Сєверодонецьк: Вид-во СНУ ім. В.Даля, 2017. №3[233]. С. 158−162.

Фомін, О.В., Прокопенко, П.М., Горбунов, М.І., Сова, С.С. Особливості визначення залишкового ресурсу вагоповірочних вагонів з терміном служби, який перевищує призначений. Транспортні системи і технології. Київ: Вид-во ДУІТ, 2019, №34. С. 95-105.

Kanavalau, Y., Putsiata, A. Evaluation Techniques for Residual in-Use Utility of the Railway Car Hopper-Batcher Bearing Structure with a Long-term Service. Procedia Engineering. 2016. 9th International Scientific Conference Transbaltica 2015. №134. P. 57-63.

Kelrykh, M., Fomin, O. Perspective directions of planning carrying systems of gondolas. Scientific and technical journal «Metallurgical and Mining Industry». 2014. №6. P. 64-67.

Lovskaya, A.A. Peculiarities of computer modeling of strength of body bearing construction of gondola car during transportation by ferry-bridge. Scientific and technical journal «Metallurgical and Mining Industry». 2015. №1. P. 49-54.

ДСТУ ГОСТ 33211:2017. Вагони вантажні. Вимоги до міцності та динамічних якостей. К.: Держстандарт України, 2017. 53 с.

Myamlin S., Lingaitis L.P., Dailydka S., Vaičiūnas G., Bogdevičius M., & Bureika G. Determination of the dynamic characteristics of freight wagons with various bogie. Journal «Transport». Vilnius. 2015. №1 (30). P. 88-92.

Мурадян, Л.А., Шапошник, В.Ю., Мищенко, А.А. Методологические основы определения эксплуатационных характеристик несамоходного подвижного состава. Наука и прогресс транспорта. Вестник ДНУЖТ. Днепропетровск: Изд-во ДНУЖТ им. академика В. Лазаряна, 2016. №1 (61). С. 169-179.

Недужа, Л.О., Швець, А.О. Теоретичні та експериментальні дослідження міцнісних якостей хребтової балки вантажного вагона. Наука та прогрес транспорту. Вісник ДНУЗТ. Дніпро: Вид-во ДНУЗТ ім. академіка В. Лазаряна, 2018. №1 (73). С. 131-147.

Политехнический словарь / Редкол.: А. Ю. Ишлинский (гл. ред.) и др. - 3-е изд., перераб. и доп. М.: П50 Большая Российская Энциклопедия, 2000. 656 с.: ил.

Fomin, O. Lovska, А., Masliyev, V., Tsymbaliuk, A., Burlutski, O. (2019). Determining strength indicators for the bearing structure of a covered wagon's body made from round pipes when transported by a railroad ferry. Eastern-European Journal of Enterprise Technologies.Vol. 7, 1 (97). P. 33-40.

Oleksij Fomin, Juraj Gerlici, Alyona Lovskaya, Kateryna Kravchenko, Pavlo Prokopenko, Anna Fomina and Vladimír Hauser. (2018). Research of the strength of the bearing structure of the flat wagon body from round pipes during transportation on the railway ferry. MATEC Web of Conferences. Vol. 235.00003

Fomin, O., Logvinenko, O., Burlutsky, O., Rybin, A. (2018). Scientific Substantiation of Thermal Leveling for Deformations in the Car Structure. International Journal of Engineering & Technology. Vol.7. №4.3. Р.125-129.

Published

2020-06-24

How to Cite

Koshel, O., Sapronova, S., Bulich, D., & Tkachenko, V. (2020). Determination of the residual resource of carrying metal frames of cars of hopper dosers and dumpkars (dumpers) based on the results of technical diagnostics and typical tests. Transport Systems and Technologies, (35), 14–23. https://doi.org/10.32703/2617-9040-2020-35-2

Issue

Section

Technics and techology

Most read articles by the same author(s)

1 2 > >>